Discover how to Master Magnetic Sheet Laser Cutting!
In this post, we’re putting the Monport Onyx 50W laser engraver to the test with 0.5mm magnetic sheets. Using various power and speed settings, we’ll evaluate how this machine handles precise and efficient cuts on this versatile material. Whether you’re a laser enthusiast exploring new materials or a creator fine-tuning your setup, this guide will help you identify the best settings for your projects. Keep reading to see the test results, detailed settings, and tips for working with magnetic sheets!
Affiliate Disclosure: This page contains affiliate links. If you make a purchase through these links, we may earn a commission at no additional cost to you.
| Setting | Value |
| Material | 0.5 mm Magnetic Sheet |
| Power | 20% to 100% |
| Speed | 5 mm/s to 50 mm/s |
| DPI | 254 |
| Line Interval | 0.1 mm |
| Air Assist | 5 PSI |
| Frequency | 20 kHz |
| Passes | 1 |
Final results of cut test on 0.5 mm magnetic sheet.
Analysis & Observations on Cutting 0.5 mm Magnetic Sheets
Optimal Cuts:
The cleanest and most precise cuts were achieved with power settings between 60% and 80% and speeds ranging from 15–25 mm/s. These settings delivered sharp edges with minimal residue, making them suitable for projects requiring high precision.
Excess Burning:
Higher power levels, such as 90%–100%, combined with slower speeds (e.g., 5–10 mm/s), led to noticeable overburn. The edges became heavily scorched, resulting in a less polished finish. These settings are less suitable for projects where edge quality is critical.
Insufficient Cuts:
Higher speeds (30 mm/s and above) at lower power settings (20%–40%) produced incomplete cuts that failed to penetrate the magnetic sheet fully. While unsuitable for cutting, these settings may work better for light surface engraving.
Air Assist:
The 5 PSI air assist played a vital role in maintaining clean edges, effectively reducing debris buildup and preventing excessive residue from clinging to the material.
Line Interval and DPI:
With a line interval of 0.1 mm and a DPI of 254, the laser engraver maintained exceptional precision, ensuring clean and consistent results across all tested parameters.
Based on our test, the most effective settings for achieving clean cuts on 2mm basswood are:
- Power: 60%–80%
- Speed: 15–25 mm/s
- Air Assist: 5 PSI
- Line Interval: 0.1 mm
- DPI: 254
- Frequency: 20 kHz
These settings strike the perfect balance, minimizing overburn while achieving clean, complete cuts through the magnetic sheet. If you’re working on detailed projects, these parameters will ensure professional-grade results.
Affiliate Disclosure: This page contains affiliate links. If you make a purchase through these links, we may earn a commission at no additional cost to you.
Stay Connected for More Inspiration!
Looking for more laser cutting tips and inspiration? Explore the full “Material Minute” series for detailed material tests and project ideas by joining us on YouTube and Facebook! Discover exciting projects, detailed material tests, and expert tips to help you master your Monport Onyx and beyond. Whether you’re a beginner or a pro, we’ve got something for you!
Be inspired by our Projects and explore our Material Tests to see real-world results and find the perfect settings for your next masterpiece. Let’s create something amazing together—follow us now and be part of a passionate community of creators!
